VGCREATESection: Maintenance Commands (8)
Updated: LVM TOOLS 2.02.176(2) (2017-11-03)
Index | Return to Main Contents
NAMEvgcreate - Create a volume group
[ option_args ]
DESCRIPTIONvgcreate creates a new VG on block devices. If the devices were not previously intialized as PVs with pvcreate(8), vgcreate will inititialize them, making them PVs. The pvcreate options for initializing devices are also available with vgcreate.
USAGEvgcreate VG_new PV ...
[ -A|--autobackup y|n ]
[ -c|--clustered y|n ]
[ -l|--maxlogicalvolumes Number ]
[ -p|--maxphysicalvolumes Number ]
[ -M|--metadatatype lvm2|lvm1 ]
[ -s|--physicalextentsize Size[m|UNIT] ]
[ -f|--force ]
[ -Z|--zero y|n ]
[ --addtag Tag ]
[ --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit ]
[ --metadataprofile String ]
[ --labelsector Number ]
[ --metadatasize Size[m|UNIT] ]
[ --pvmetadatacopies 0|1|2 ]
[ --[vg]metadatacopies all|unmanaged|Number ]
[ --reportformat basic|json ]
[ --dataalignment Size[k|UNIT] ]
[ --dataalignmentoffset Size[k|UNIT] ]
[ --shared ]
[ --systemid String ]
[ --locktype sanlock|dlm|none ]
[ --lockopt String ]
[ COMMON_OPTIONS ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --driverloaded y|n ]
[ --longhelp ]
[ --profile String ]
[ --version ]
- --addtag Tag
- Adds a tag to a PV, VG or LV. This option can be repeated to add multiple tags at once. See lvm(8) for information about tags.
- --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
- Determines the allocation policy when a command needs to allocate Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy which can be changed with vgchange/lvchange, or overriden on the command line. normal applies common sense rules such as not placing parallel stripes on the same PV. inherit applies the VG policy to an LV. contiguous requires new PEs be placed adjacent to existing PEs. cling places new PEs on the same PV as existing PEs in the same stripe of the LV. If there are sufficient PEs for an allocation, but normal does not use them, anywhere will use them even if it reduces performance, e.g. by placing two stripes on the same PV. Optional positional PV args on the command line can also be used to limit which PVs the command will use for allocation. See lvm(8) for more information about allocation.
- -A|--autobackup y|n
- Specifies if metadata should be backed up automatically after a change. Enabling this is strongly advised! See vgcfgbackup(8) for more information.
- -c|--clustered y|n
- Create a clustered VG using clvmd if LVM is compiled with cluster support. This allows multiple hosts to share a VG on shared devices. clvmd and a lock manager must be configured and running. (A clustered VG using clvmd is different from a shared VG using lvmlockd.) See clvmd(8) for more information about clustered VGs.
- --commandprofile String
- The command profile to use for command configuration. See lvm.conf(5) for more information about profiles.
- --config String
- Config settings for the command. These override lvm.conf settings. The String arg uses the same format as lvm.conf, or may use section/field syntax. See lvm.conf(5) for more information about config.
- --dataalignment Size[k|UNIT]
- Align the start of the data to a multiple of this number. Also specify an appropriate Physical Extent size when creating a VG. To see the location of the first Physical Extent of an existing PV, use pvs -o +pe_start. In addition, it may be shifted by an alignment offset. See lvm.conf/data_alignment_offset_detection and --dataalignmentoffset.
- --dataalignmentoffset Size[k|UNIT]
- Shift the start of the data area by this additional offset.
- -d|--debug ...
- Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured).
- --driverloaded y|n
- If set to no, the command will not attempt to use device-mapper. For testing and debugging.
- -f|--force ...
- Override various checks, confirmations and protections. Use with extreme caution.
- Display help text.
- --labelsector Number
- By default the PV is labelled with an LVM2 identifier in its second sector (sector 1). This lets you use a different sector near the start of the disk (between 0 and 3 inclusive - see LABEL_SCAN_SECTORS in the source). Use with care.
- --lockopt String
- Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more information.
- --locktype sanlock|dlm|none
- Specify the VG lock type directly in place of using --shared. See lvmlockd(8) for more information.
- Display long help text.
- -l|--maxlogicalvolumes Number
- Sets the maximum number of LVs allowed in a VG.
- -p|--maxphysicalvolumes Number
- Sets the maximum number of PVs that can belong to the VG. The value 0 removes any limitation. For large numbers of PVs, also see options --pvmetadatacopies, and --vgmetadatacopies for improving performance.
- --metadataprofile String
- The metadata profile to use for command configuration. See lvm.conf(5) for more information about profiles.
- --metadatasize Size[m|UNIT]
- The approximate amount of space used for each VG metadata area. The size may be rounded.
- -M|--metadatatype lvm2|lvm1
- Specifies the type of on-disk metadata to use. lvm2 (or just 2) is the current, standard format. lvm1 (or just 1) is a historical format that can be used for accessing old data.
- -s|--physicalextentsize Size[m|UNIT]
- Sets the physical extent size of PVs in the VG. The value must be either a power of 2 of at least 1 sector (where the sector size is the largest sector size of the PVs currently used in the VG), or at least 128KiB. Once this value has been set, it is difficult to change without recreating the VG, unless no extents need moving.
- --profile String
- An alias for --commandprofile or --metadataprofile, depending on the command.
- --pvmetadatacopies 0|1|2
- The number of metadata areas to set aside on a PV for storing VG metadata. When 2, one copy of the VG metadata is stored at the front of the PV and a second copy is stored at the end. When 1, one copy of the VG metadata is stored at the front of the PV (starting in the 5th sector). When 0, no copies of the VG metadata are stored on the given PV. This may be useful in VGs containing many PVs (this places limitations on the ability to use vgsplit later.)
- -q|--quiet ...
- Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer 'no'.
- --reportformat basic|json
- Overrides current output format for reports which is defined globally by the report/output_format setting in lvm.conf. basic is the original format with columns and rows. If there is more than one report per command, each report is prefixed with the report name for identification. json produces report output in JSON format. See lvmreport(7) for more information.
- Create a shared VG using lvmlockd if LVM is compiled with lockd support. lvmlockd will select lock type sanlock or dlm depending on which lock manager is running. This allows multiple hosts to share a VG on shared devices. lvmlockd and a lock manager must be configured and running. (A shared VG using lvmlockd is different from a clustered VG using clvmd.) See lvmlockd(8) for more information about shared VGs.
- --systemid String
- Specifies the system ID that will be given to the new VG, overriding the system ID of the host running the command. A VG is normally created without this option, in which case the new VG is given the system ID of the host creating it. Using this option requires caution because the system ID of the new VG may not match the system ID of the host running the command, leaving the VG inaccessible to the host. See lvmsystemid(7) for more information.
- Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on reading back metadata it believes has changed but hasn't.
- -v|--verbose ...
- Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr.
- Display version information.
- --[vg]metadatacopies all|unmanaged|Number
- Number of copies of the VG metadata that are kept. VG metadata is kept in VG metadata areas on PVs in the VG, i.e. reserved space at the start and/or end of the PVs. Keeping a copy of the VG metadata on every PV can reduce performance in VGs containing a large number of PVs. When this number is set to a non-zero value, LVM will automatically choose PVs on which to store metadata, using the metadataignore flags on PVs to achieve the specified number. The number can also be replaced with special string values: unmanaged causes LVM to not automatically manage the PV metadataignore flags. all causes LVM to first clear the metadataignore flags on all PVs, and then to become unmanaged.
- Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see -qq.)
- -Z|--zero y|n
- Controls if the first 4 sectors (2048 bytes) of the device are wiped. The default is to wipe these sectors unless either or both of --restorefile or --uuid are specified.
- Volume Group name. See lvm(8) for valid names.
- Physical Volume name, a device path under /dev. For commands managing physical extents, a PV positional arg generally accepts a suffix indicating a range (or multiple ranges) of physical extents (PEs). When the first PE is omitted, it defaults to the start of the device, and when the last PE is omitted it defaults to end. Start and end range (inclusive): PV[:PE-PE]... Start and length range (counting from 0): PV[:PE+PE]...
- See the option description for information about the string content.
- Size is an input number that accepts an optional unit. Input units are always treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit is specified by letter, followed by |UNIT. UNIT represents other possible input units: bBsSkKmMgGtTpPeE. b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes, m|M is megabytes, g|G is gigabytes, t|T is terabytes, p|P is petabytes, e|E is exabytes. (This should not be confused with the output control --units, where capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLESSee lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8) vgexport(8) vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)
Return to Main Contents