Image
EAN-139780877847762   EAN-13 barcode 9780877847762
Product NameArt Of Biblical History, The
LanguageEnglish
CategoryBook / Magazine / Publication
Short DescriptionPaperback
Amazon.comA Buy on Amazon ~ 0310431808
SKUCB-01-11-07-00003
Price New11.56 US Dollars    (curriencies)
Price Used3.35 US Dollars    (curriencies)
Width0.75 inches    (convert)
Height8.5 inches    (convert)
Length5.47 inches    (convert)
Weight8.8 ounces    (convert)
AuthorV. Philips Long
Page Count160
BindingPaperback
Published09/23/1994
Long DescriptionThis fifth volume in the Foundations of Contemporary Interpretation series is an exploration of both the historical nature of the Bible and the character of biblical history writing. In view of recent trends in biblical studies, the age-old question of the relationship between history and faith must again take center stage in hermeneutical discussion. The Art of Biblical History seeks to address basic questions that all Bible readers might ask: Is the Bible a history book? What do we mean by "history" anyway? In what sense is biblical historicity important for faith? Are there guidelines for discovering what historical truth claims a particular passage may be making? The discussions take account of both current thinking among biblical scholars and the best insights of secular historians. The result is an attempt to describe biblical history writing as a kind of representational art and to commend a hermeneutical approach that does justice not merely to the historical or literary or theological character of the Bible, but to all three at once.
Similar Items9780310409212: Has The Church Misread The Bible? The History Of Interpretation In The Light Of Current Issues
9780310230229: I & II Samuel: A Commentary (Library of Biblical Interpretation)
9780310211563: An Introduction To The Old Testament: Second Edition
9780281036271: Foundations Of Contemporary Interpretation
9780253204530: The Poetics Of Biblical Narrative: Ideological Literature And The Drama Of Reading (Indiana Studies In Biblical Literature)
9780192132543: An Introduction To The Old Testament: Second Edition
9780139361531: An Introduction To The Old Testament: Second Edition
9780139361203: An Introduction To The Old Testament: Second Edition
9780091506919: An Introduction To The Old Testament Historical Books
9780002152969: Is God A Moral Monster?: Making Sense Of The Old Testament God
View 32 more similar items
Created03-15-2012 1:05:00am
Modified09-25-2017 10:14:16am
MD5621c839245f7e64affb535de89071342
SHA2568f0d220d09b7a7828d60726803b154417741af900289fb915f2d364976764793
Search Googleby EAN or by Title
Query Time0.0210819

Article of interest

The interleave symbology stores digits in 2 sets of 5 stripes alternating black and white. Each set encodes a digit and these digits are interleaved together. One digit is made from the black stripes and one from the white stripes. Thus the name... Interleave 2 of 5.

Interleave 2 of 5 barcode

Each stripe in the symbol is either black or white and each of those can be narrow or wide. A wide stripe is 2 or 3 times as thick as a narrow stripe. This ratio must be consistant throughout the symbol. This means if your wide stripes start out 2 times as wide as a narrow, they must always be 2 times as wide throughout the entire symbol. You can't have some wide stripes 2 times and others 3 times as wide as a narrow stripe.

Each wide stripe has a value based on its position. The sum of these values determines which digit is represented. Every number is made up of 2 wide and 3 narrow stripes so the digit zero has a mnemonic value of 11 (eleven). This seems odd until you look at the chart below. You will see that to have a value of zero would otherwise require a single wide stripe and this would be a bigger problem than switching a mnemonic value of 11 into the digit 0 (zero).

Weight 1 2 4 7 0 Mnemonic
Digit black or white width (using weight)
0 n n W W n 4+7 (force 0)
1 W n n n W 1+0
2 n W n n W 2+0
3 W W n n n 1+2
4 n n W n W 4+0
5 W n W n n 1+4
6 n W W n n 2+4
7 n n n W W 7+0
8 W n n W n 1+7
9 n W n W n 2+7

Interleave 2 of 5 can only encode even numbers of digits. In many cases, the last digit is used as the check digit and this is calculated in the same way that UPC or EAN check digits are calculated. Often, this final digit is not displayed under the barcode because it is not part of the original number. In these case where the check digit is part of the encoded number, there are an ODD number of usable digits plus the check digit. When a check digit is not used, all of the digits are significant. There is nothing in the barcode to identify if the last digit is being used as a check digit or not. You must know this based on your application. In the event you need to encode an odd number of digits without the check digit (or an even number plus the check digit) a leading zero is added to the number to cause the end result to be an even number of digits total. The barcode also starts with a start marker made up of 4 narrow lines (black white black white) and stop mark is always located at the end also which is one wide stripe and two narrow stripes (black white black).

In our example image below, the start and stop marks are identified in yellow. The digits pairs are identified by the blue and green stripes. We are using a check digit in our example and although it doesn't show in the actual barcode (shown above), we have marked it in red in the sample below so you can see where it is being calculated in. For the example, the check digit works out to be the number 5.

Interleave 2 of 5 is prone to have partial scans. If the scanner is allowed to slip off the top or bottom of the barcode, trailing digits could be missed and the scanner could think that it has done its job. There are a couple solutions for this problem.

  1. Use a check digit as we have done in our examples. The application that makes use of the scanned numbers would also calculate the check digit and if it doesn't match what is expected the entire number is discarded. Using our example 1, 2, 3 ... 8, 9 give us a check digit of 5. So if only the first 5 digits scan properly, the program would use 1, 2, 3 and 4 to calculate a check digit which should be 8. Because the 5th digit of our example is 5 not 8 we know we didn't get the entire number so we discard it all.
  2. You could always use a fixed number of digits and left pad with zero. Then you application could check the length of the entire number including leading zeros and if it isn't what you are expecting, again you discard the entire number.
  3. Lastly would be to use guide bars on the top and bottom of the barcode. The guide bars must touch the top and bottom of each stripe and run straight accross in the scanning direction. These bars must also be at least 3 times wider than a narrow bar to make sure they aren't mistaken for an actual bar. If the scanner slips off the top or bottom of the symbol, these bars prevent a valid scan. There is an example shown below.

If you are interested in creating your own free Interleave 2 of 5 barcodes, you can visit our barcode page and make them and save them for your use.

Close

Search

Close

Share

Close

Dialog