Image
EAN-139780691151120   EAN-13 barcode 9780691151120
Product NameDeath And Redemption: The Gulag And The Shaping Of Soviet Society
LanguageEnglish
CategoryBook / Magazine / Publication
Short DescriptionHeight:9.02 inches / Length:5.98 inches / Weight:1.13 pounds / Width:0.91 inches
Amazon.comA Buy on Amazon ~ 0691151121
SKU2042828
Price New33.03 US Dollars    (curriencies)
Price Used35.48 US Dollars    (curriencies)
Width0.9 inches    (convert)
Height9.1 inches    (convert)
Length6 inches    (convert)
Weight18.4 ounces    (convert)
AuthorSteven A. Barnes
Page Count368
BindingPaperback
Published04/24/2011
FeaturesUsed Book in Good Condition
Long DescriptionDeath and Redemption offers a fundamental reinterpretation of the role of the Gulag--the Soviet Union's vast system of forced-labor camps, internal exile, and prisons--in Soviet society. Soviet authorities undoubtedly had the means to exterminate all the prisoners who passed through the Gulag, but unlike the Nazis they did not conceive of their concentration camps as instruments of genocide. In this provocative book, Steven Barnes argues that the Gulag must be understood primarily as a penal institution where prisoners were given one final chance to reintegrate into Soviet society. Millions whom authorities deemed "reeducated" through brutal forced labor were allowed to leave. Millions more who "failed" never got out alive. Drawing on newly opened archives in Russia and Kazakhstan as well as memoirs by actual prisoners, Barnes shows how the Gulag was integral to the Soviet goal of building a utopian socialist society. He takes readers into the Gulag itself, focusing on one outpost of the Gulag system in the Karaganda region of Kazakhstan, a location that featured the full panoply of Soviet detention institutions. Barnes traces the Gulag experience from its beginnings after the 1917 Russian Revolution to its decline following the 1953 death of Stalin. Death and Redemption reveals how the Gulag defined the border between those who would reenter Soviet society and those who would be excluded through death.
Similar Items9780684826806: Survival In Auschwitz
9780520208230: Magnetic Mountain: Stalinism As A Civilization
9780199237678: The Russian Revolution
9780140146592: The Russian Revolution
9780140080254: The Russian Revolution
9780060800451: The Russian Revolution
9781931859851: The Bolsheviks Come To Power: The Revolution Of 1917 In Petrograd
9783630879963: The Origins Of Nazi Violence
9780195385090: The Unknown Gulag: The Lost World Of Stalin's Special Settlements
9781565847880: The Origins Of Nazi Violence
View 31 more similar items
Created02-19-2013 1:36:11am
Modified04-30-2020 11:30:00pm
MD58c1ae4f13448d2886e680c92b4e317e8
SHA256ffe26d0d48de32602fe50d05387c8317d2178561e17b3892fb49e009a4b0b336
Search Googleby EAN or by Title
Query Time0.0214660

Article of interest

The interleave symbology stores digits in 2 sets of 5 stripes alternating black and white. Each set encodes a digit and these digits are interleaved together. One digit is made from the black stripes and one from the white stripes. Thus the name... Interleave 2 of 5.

Interleave 2 of 5 barcode

Each stripe in the symbol is either black or white and each of those can be narrow or wide. A wide stripe is 2 or 3 times as thick as a narrow stripe. This ratio must be consistant throughout the symbol. This means if your wide stripes start out 2 times as wide as a narrow, they must always be 2 times as wide throughout the entire symbol. You can't have some wide stripes 2 times and others 3 times as wide as a narrow stripe.

Each wide stripe has a value based on its position. The sum of these values determines which digit is represented. Every number is made up of 2 wide and 3 narrow stripes so the digit zero has a mnemonic value of 11 (eleven). This seems odd until you look at the chart below. You will see that to have a value of zero would otherwise require a single wide stripe and this would be a bigger problem than switching a mnemonic value of 11 into the digit 0 (zero).

Weight 1 2 4 7 0 Mnemonic
Digit black or white width (using weight)
0 n n W W n 4+7 (force 0)
1 W n n n W 1+0
2 n W n n W 2+0
3 W W n n n 1+2
4 n n W n W 4+0
5 W n W n n 1+4
6 n W W n n 2+4
7 n n n W W 7+0
8 W n n W n 1+7
9 n W n W n 2+7

Interleave 2 of 5 can only encode even numbers of digits. In many cases, the last digit is used as the check digit and this is calculated in the same way that UPC or EAN check digits are calculated. Often, this final digit is not displayed under the barcode because it is not part of the original number. In these case where the check digit is part of the encoded number, there are an ODD number of usable digits plus the check digit. When a check digit is not used, all of the digits are significant. There is nothing in the barcode to identify if the last digit is being used as a check digit or not. You must know this based on your application. In the event you need to encode an odd number of digits without the check digit (or an even number plus the check digit) a leading zero is added to the number to cause the end result to be an even number of digits total. The barcode also starts with a start marker made up of 4 narrow lines (black white black white) and stop mark is always located at the end also which is one wide stripe and two narrow stripes (black white black).

In our example image below, the start and stop marks are identified in yellow. The digits pairs are identified by the blue and green stripes. We are using a check digit in our example and although it doesn't show in the actual barcode (shown above), we have marked it in red in the sample below so you can see where it is being calculated in. For the example, the check digit works out to be the number 5.

Interleave 2 of 5 is prone to have partial scans. If the scanner is allowed to slip off the top or bottom of the barcode, trailing digits could be missed and the scanner could think that it has done its job. There are a couple solutions for this problem.

  1. Use a check digit as we have done in our examples. The application that makes use of the scanned numbers would also calculate the check digit and if it doesn't match what is expected the entire number is discarded. Using our example 1, 2, 3 ... 8, 9 give us a check digit of 5. So if only the first 5 digits scan properly, the program would use 1, 2, 3 and 4 to calculate a check digit which should be 8. Because the 5th digit of our example is 5 not 8 we know we didn't get the entire number so we discard it all.
  2. You could always use a fixed number of digits and left pad with zero. Then you application could check the length of the entire number including leading zeros and if it isn't what you are expecting, again you discard the entire number.
  3. Lastly would be to use guide bars on the top and bottom of the barcode. The guide bars must touch the top and bottom of each stripe and run straight accross in the scanning direction. These bars must also be at least 3 times wider than a narrow bar to make sure they aren't mistaken for an actual bar. If the scanner slips off the top or bottom of the symbol, these bars prevent a valid scan. There is an example shown below.

If you are interested in creating your own free Interleave 2 of 5 barcodes, you can visit our barcode page and make them and save them for your use.

Close

Search

Close

Share