Image
EAN-139780199747566   EAN-13 barcode 9780199747566
Product NameMassacre At Mountain Meadows
CategoryBook / Magazine / Publication
Short DescriptionHeight:8.98 inches / Length:5.75 inches / Weight:1.29 pounds / Width:1.1 inches
Amazon.comA Buy on Amazon ~ 0199747563
SKU0199747563-11-XBZN
Price New9.12 US Dollars    (curriencies)
Price Used6.94 US Dollars    (curriencies)
Width1.3 inches    (convert)
Height5.8 inches    (convert)
Length8.9 inches    (convert)
Weight20.8 ounces    (convert)
AuthorRonald W. Walker, Richard E. Turley, Glen M. Leonard
Page Count448
BindingPaperback
Published02/09/2011
FeaturesISBN13: 9780199747566, Condition: New, Notes: BRAND NEW FROM PUBLISHER! 100% Satisfaction Guarantee. Tracking provided on most orders. Buy with Confidence! Millions of books sold!
Long DescriptionOn September 11, 1857, a band of Mormon militia, under a flag of truce, lured unarmed members of a party of emigrants from their fortified encampment and, with their Paiute allies, killed them. More than 120 men, women, and children perished in the slaughter. Massacre at Mountain Meadows offers the most thoroughly researched account of the massacre ever written. Drawn from documents previously not available to scholars and a careful re-reading of traditional sources, this gripping narrative offers fascinating new insight into why Mormons settlers in isolated southern Utah deceived the emigrant party with a promise of safety and then killed the adults and all but seventeen of the youngest children. The book sheds light on factors contributing to the tragic event, including the war hysteria that overcame the Mormons after President James Buchanan dispatched federal troops to Utah Territory to put down a supposed rebellion, the suspicion and conflicts that polarized the perpetrators and victims, and the reminders of attacks on Mormons in earlier settlements in Missouri and Illinois. It also analyzes the influence of Brigham Young's rhetoric and military strategy during the infamous "Utah War" and the role of local Mormon militia leaders in enticing Paiute Indians to join in the attack. Throughout the book, the authors paint finely drawn portraits of the key players in the drama, their backgrounds, personalities, and roles in the unfolding story of misunderstanding, misinformation, indecision, and personal vendettas. The Mountain Meadows Massacre stands as one of the darkest events in Mormon history. Neither a whitewash nor an exposé, Massacre at Mountain Meadows provides the clearest and most accurate account of a key event in American religious history.
Similar Items9780879056902: Utah, The Right Place: The Official Centennial History
9780873281782: A Mormon Chronicle: The Diaries of John D. Lee, 1848-1876 (The Huntington Library Classics)
9780806136394: Blood Of The Prophets: Brigham Young And The Massacre At Mountain Meadows
9780595092581: Massacre at Mountain Meadows: An American Legend and a Monumental Crime
9780559893322: The Mountain Meadows Massacre
9780548469002: The Mountain Meadows Massacre
9780199897643: The Mormon Image In The American Mind: Fifty Years Of Public Perception
9780140129595: Innocent Blood: Essential Narratives of the Mountain Meadows Massacre ( (Kingdom in the West: The Mormons and the American Frontier Series)
0043396198166: September Dawn
Created01-28-2013 12:47:10am
Modified04-30-2020 4:53:35pm
MD5a5fcf6dd96cc77cd0e4ee93660d4996e
SHA256898e9154737b9204c161fb0304808736bb5df1bca1ca9b61df40deb734414311
Search Googleby EAN or by Title
Query Time0.0195880

Article of interest

The interleave symbology stores digits in 2 sets of 5 stripes alternating black and white. Each set encodes a digit and these digits are interleaved together. One digit is made from the black stripes and one from the white stripes. Thus the name... Interleave 2 of 5.

Interleave 2 of 5 barcode

Each stripe in the symbol is either black or white and each of those can be narrow or wide. A wide stripe is 2 or 3 times as thick as a narrow stripe. This ratio must be consistant throughout the symbol. This means if your wide stripes start out 2 times as wide as a narrow, they must always be 2 times as wide throughout the entire symbol. You can't have some wide stripes 2 times and others 3 times as wide as a narrow stripe.

Each wide stripe has a value based on its position. The sum of these values determines which digit is represented. Every number is made up of 2 wide and 3 narrow stripes so the digit zero has a mnemonic value of 11 (eleven). This seems odd until you look at the chart below. You will see that to have a value of zero would otherwise require a single wide stripe and this would be a bigger problem than switching a mnemonic value of 11 into the digit 0 (zero).

Weight 1 2 4 7 0 Mnemonic
Digit black or white width (using weight)
0 n n W W n 4+7 (force 0)
1 W n n n W 1+0
2 n W n n W 2+0
3 W W n n n 1+2
4 n n W n W 4+0
5 W n W n n 1+4
6 n W W n n 2+4
7 n n n W W 7+0
8 W n n W n 1+7
9 n W n W n 2+7

Interleave 2 of 5 can only encode even numbers of digits. In many cases, the last digit is used as the check digit and this is calculated in the same way that UPC or EAN check digits are calculated. Often, this final digit is not displayed under the barcode because it is not part of the original number. In these case where the check digit is part of the encoded number, there are an ODD number of usable digits plus the check digit. When a check digit is not used, all of the digits are significant. There is nothing in the barcode to identify if the last digit is being used as a check digit or not. You must know this based on your application. In the event you need to encode an odd number of digits without the check digit (or an even number plus the check digit) a leading zero is added to the number to cause the end result to be an even number of digits total. The barcode also starts with a start marker made up of 4 narrow lines (black white black white) and stop mark is always located at the end also which is one wide stripe and two narrow stripes (black white black).

In our example image below, the start and stop marks are identified in yellow. The digits pairs are identified by the blue and green stripes. We are using a check digit in our example and although it doesn't show in the actual barcode (shown above), we have marked it in red in the sample below so you can see where it is being calculated in. For the example, the check digit works out to be the number 5.

Interleave 2 of 5 is prone to have partial scans. If the scanner is allowed to slip off the top or bottom of the barcode, trailing digits could be missed and the scanner could think that it has done its job. There are a couple solutions for this problem.

  1. Use a check digit as we have done in our examples. The application that makes use of the scanned numbers would also calculate the check digit and if it doesn't match what is expected the entire number is discarded. Using our example 1, 2, 3 ... 8, 9 give us a check digit of 5. So if only the first 5 digits scan properly, the program would use 1, 2, 3 and 4 to calculate a check digit which should be 8. Because the 5th digit of our example is 5 not 8 we know we didn't get the entire number so we discard it all.
  2. You could always use a fixed number of digits and left pad with zero. Then you application could check the length of the entire number including leading zeros and if it isn't what you are expecting, again you discard the entire number.
  3. Lastly would be to use guide bars on the top and bottom of the barcode. The guide bars must touch the top and bottom of each stripe and run straight accross in the scanning direction. These bars must also be at least 3 times wider than a narrow bar to make sure they aren't mistaken for an actual bar. If the scanner slips off the top or bottom of the symbol, these bars prevent a valid scan. There is an example shown below.

If you are interested in creating your own free Interleave 2 of 5 barcodes, you can visit our barcode page and make them and save them for your use.

Close

Search

Close

Share

Close

Dialog