EAN-130851890000768   EAN-13 barcode 0851890000768
UPC-A851890000768   UPC-A barcode 851890000768
Product NameReliance Controls Ap31rv 30 Amp L5-30 To Rv Generator Power Adapter Plug
Short DescriptionHeight:2 inches / Length:3 inches / Weight:0.3 pounds / Width:2 inches
Amazon.comA Buy on Amazon ~ B000HRWGKS
Price New11.64 US Dollars    (curriencies)
Long DescriptionReliance 25' RV Power Cord and Adapter Plugs, to hook up your RV or 5th wheel! BIG BUCKS OFF! Quality Reliance electrical gear to connect your generator to your "home away from home!" A 25' RV Extension Cord and 2 Adapter Plugs, whatever you need to get in the electrical loop. Check them out and choose yours now! It converts an L5-30 receptacle to an RV receptacle. Use to connect a 30 amp RV cord to an L5-30 generator locking plug receptacle. AVAILABLE SEPARATELY: Reliance 5-15 Adapter Plug; Reliance 25' RV Power Cord - word search in our store for 'Reliance'. Reliance L5-30 Adapter Plug
Similar Items0786102002714: Honda 08P57-ZS9-00S EU3000is Generator Silver Cover
0847428062155: Smarter Tools STAP-2000iQ, 1600 Running Watts/2000 Starting Watts, Gas Powered Portable Inverter
0011675305451: Briggs & Stratton 30545 P3000 PowerSmart Series Portable 3000-Watt Inverter Generator with (4) 120-Volt AC Outlets and (1) 12-Volt DC Outlet
0046396000330: PowerFit PF923055 240-volt 4-Prong Male Plug Adapter Twist for 30-Amp Female Connector
Created11-22-2012 8:50:16pm
Modified10-12-2017 1:17:03am
Search Googleby EAN or by Title
Query Time0.0123150

Article of interest

You  may have noticed that we were off line for a while here and there over the past couple days.

We had planned one short outage and posted information about it in advance. But after installing the new RAID system we still had to move all of the data off of the old system over to the new system.

Each time we got data off of one of the hard drives, we had to shut down the system for a short time to physically remove the old drive. We had to do this several times because we had several old drives on the old RAID system and they could only be moved one at a time.

We tried to keep the down time to a minimum but it still took a little longer than expected after the last drive was removed and swapped out. There were a couple unexpted issues relating to that last hard drive.

Fortunately, now with the new RAID in place, we can HOT SWAP drives. This means that when we change out the hard drives we don't have to turn the power off.

We still have a couple internal hard drives that do require a power off if we need to spaw them but it is unlikely we will need to do that unless one dies. The old drives didn't die, we just needed to expand the drive space with larger hard drives so we went to the hot swap system to plan for the future.