EAN-130095969623759   EAN-13 barcode 0095969623759
UPC-A095969623759   UPC-A barcode 095969623759
Product NameFluke 324 40/400A AC, 600V AC/DC True-RMS Clamp Meter with Temperature, & Capacitance Measurements
CategoryHardware: Tools
Amazon.comA Buy on Amazon ~ B009AZ0TXE
Price New160.87 US Dollars    (curriencies)
Price Used179.00 US Dollars    (curriencies)
Width4.21 inches    (convert)
Height2.72 inches    (convert)
Length9.49 inches    (convert)
Weight2 kilograms    (convert)
  • Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Slim, ergonomic design
  • Large, easy to read backlight display
  • CAT IV 300V/CAT III 600 Volt safety rating
  • Hold button
  • Temperature and capacitance measurement
Long DescriptionThe Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.
Similar Items0999993779263: Fluke 1ac-A1-Ii Volt-Alert Ac Non-Contact Voltage Tester
0999992408539: Fluke 1ac-A1-Ii Volt-Alert Ac Non-Contact Voltage Tester
0686800491905: Yellow Jacket 49190 3 1/8" Gauge Protective Boots Set
0646635095365: Fluke 1AC-A1-II VoltAlert Non-Contact Voltage Tester
0095969639439: Fluke 62 MAX IR Thermometer, Non Contact, -20 to +932 Degree F Range
0095969620208: Fluke 62 Max Infrared Thermometer, -22 To 932 Degrees F Range
0095969612425: Fluke AC175 Threaded Slide-on Alligator Clip Set with Flexible Boots
0095969414852: Amprobe Els2a Ac Current Clamp Accessory
0095969370974: Fluke 80ak-A Thermocouple Adapter
0095969290784: Fluke Voltalert 1ac-A1 Ii
0095969040778: Fluke 80pk-8 Pipe Clamp Temperature Probe
0092644850745: Klein Tools 85074 Cushion Grip Screwdriver Set (6 Pieces)
0092644325816: Klein Tools 32581 4-in-1 Electronics Screwdriver
Created04-14-2018 12:22:36am
Modified05-11-2018 5:59:36pm
Search Googleby EAN or by Title
Query Time0.0097439

A Data Matrix code is a two-dimensional barcode make up of blocks of black and white modules put together to make either a square or rectangular pattern. The information to be encoded can be text or raw data.

Normally, data size is from a few bytes up to 1,556 bytes. The length of the data depends on the symbol dimension used. To make sure the data can be read even when the pattern is slightly damaged, error correction codes are added which increase symbol strength. A Data Matrix symbol can store up to 2,335 alphanumeric characters. Here is a sample you can scan.

Barcode Data Matrix

Data Matrix symbols are rectangular in shape and usually square. As more data is added, modules are put together to allow for the data and error correction. Each module can be identified by the "L" shaped black line that runs down the left and across the bottom of each module. In the sample shown above, there are four modules. These "L" shaped sections are known as the "finder pattern". The top and right border of each module are made up of alternating light and dark blocks. Light blocks represent 0 (zero) and the dark blocks represent 1 (one). These are known as the "timing pattern". All of the blocks in the middle of each module make up the data and check codes. The entire pattern can range in size from 8x8 to 144x144 in size.