|Product Name||Heath Zenith Sl-4192-Wh Six-Sided Die-Cast Aluminum Lantern, White With Beveled Glass|
|Short Description||Height:18.5 inches / Length:8.5 inches / Weight:1 pounds / Width:7 inches|
|Amazon.com||Buy on Amazon ~ B000HM7Q2Q|
|Price New||29.00 US Dollars (curriencies)|
|Price Used||34.63 US Dollars (curriencies)|
|Long Description||Motion-activated lights are convenient and energy efficient, but they can be a little bulky and awkward to look at-in the driveway is fine, but you wouldn't want to put one on your porch. Unless it's one of Heath Zenith's porch lights, that is. These products give you the best of both worlds, combining motion-activation and traditional outdoor-light design.|
The SL-4192 is a six-sided wall-mount lantern that includes a hidden motion-sensing device that detects movement in a 180-degree radius up to a distance of 30 feet. You can set the light timer to one, five, or ten minutes, and the sensor itself may be adjusted to give you more or less sensitivity (so it doesn't light up every time a car drives by). The weather-resistant aluminum construction means it's going to look good for a while, too.
This model also features "Dual Brite" lighting, which means you can use it for low-level accent lighting in addition to the full-light effect you get with motion-activation. An included timer allows you to set low-light mode for three hours, six hours, or dusk to dawn (an automatic photocell deactivates the unit in daylight). You can also turn the light on and off at will via the manual override that mounts to an existing indoor switch.
If you're looking to save a little money on outdoor lighting by installing a motion-detector, this is a great option that won't look out of place. Requires one medium-based bulb of up to 100 watts (not included). --Josh Dettweiler
What's in the Box
|Search Google||by EAN or by Title|
This symbology was developed by the MSI Data Corporation and is based on the Plessey Code symbology. MSI is most often used in warehouses and inventory control.
This is a continuous non-self-checking symbology meaning it has no predetermined length and there is no validation built into the barcode itself. If you want to validate the data stored in the barcode, you would need to use a check digit. Mod 10 is the most common check digit used with MSI but you can also use mod 1010 or mod 1110. It is allowed but generally not a good idea to omit the check digit all together.
There is a start marker which is represented by three binary digits 110 (where 1 is black and 0 is white). There is also a stop marker which is represented by four binary digits 1001. The remaining markers represent the numeric digits 0-9 (no text or special characters) and each digit is represented by twelve binary digits. Below is a table that describes all of the possible markers. The start and stop markers are the main difference between MSI and Plessey. That and the fact that MSI only covers digits 0-9. You can read these stripes as a binary values where 110 is binary 1 and 100 is binary 0. The stop marker simply has an extra bit on the end.
|Character||Stripe Bits||Binary Value|
|STOP||1001||0 + extra stripe|
To create a graphical barcode using this process, you can simply string together a series of 1 and 0 graphic images once you have calculated what your barcode should look like using the table shown above. You can view the source code of this page if you want to see how we created the example shown below.
|Bits:||110 100100110110 100110110110 100110100110 1001|
This is just an example of one way to perform the graphic encoding. It is often easier to just draw the lines instead of tacking together individual images. If you would like to create free MSI barcodes, please visit our barcode generator page. You can save the images you make and use them as needed.