Image
EAN-130010228109782   EAN-13 barcode 0010228109782
UPC-A010228109782   UPC-A barcode 010228109782
Product NameChampion 978 Fluorescent Paint, Red (Pack of 6)
LanguageEnglish
CategoryHardware
Amazon.comA Buy on Amazon ~ B00O71HK5Q
Model978
Width5.75 inches    (convert)
Height8.44 inches    (convert)
Length8.5 inches    (convert)
Weight625 hundredths pounds    (convert)
BindingTools & Home Improvement
FeaturesDry Time: 8-12 minutes to touch Apply top coat within 3 hours (if desired) Use for interior and exterior applications Provides optimum brilliance Outstanding durability
Long DescriptionChampion Spray on Fluorescent Paint has a quick-dry, fade-resistant formula. Use for novelty, craft and decorative applications. Use to mark hazards in the home and workplace, including curbs, steps, house numbers, trucks, cars, boats, helmets.
Created07-01-2006
Modified04-28-2020 2:24:02pm
MD55941ca829ac98721fb0a48192efd78fc
SHA256c4f6eb4f1a70e95d210d090193d2c83811e3d96ad9fe78ba9c1569375c39d821
Search Googleby EAN or by Title
Query Time0.0043731

Article of interest

You  may have noticed that we were off line for a while here and there over the past couple days.

We had planned one short outage and posted information about it in advance. But after installing the new RAID system we still had to move all of the data off of the old system over to the new system.

Each time we got data off of one of the hard drives, we had to shut down the system for a short time to physically remove the old drive. We had to do this several times because we had several old drives on the old RAID system and they could only be moved one at a time.

We tried to keep the down time to a minimum but it still took a little longer than expected after the last drive was removed and swapped out. There were a couple unexpted issues relating to that last hard drive.

Fortunately, now with the new RAID in place, we can HOT SWAP drives. This means that when we change out the hard drives we don't have to turn the power off.

We still have a couple internal hard drives that do require a power off if we need to spaw them but it is unlikely we will need to do that unless one dies. The old drives didn't die, we just needed to expand the drive space with larger hard drives so we went to the hot swap system to plan for the future.

Close

Search

Close

Share

Close

Dialog