Image
EAN-130000021077616   EAN-13 barcode 0000021077616
UPC-A000021077616   UPC-A barcode 000021077616
Product NameTi-Pvd Finish Antique Style Bathroom Sink Faucet
CategoryHardware
Amazon.comA Buy on Amazon ~ B005IDCM82
FeaturesComes with all necessary accessories for installation. Featured with durable ceramic valves ensuring there are no water leaks. Available to work more than 600,000 times at a water temperature of 90 degrees. High quality material and finishing tested at a high water pressure of 1.6Mpa.
Long DescriptionComes with all necessary accessories for installation. Featured with durable ceramic valves ensuring there are no water leaks. Available to work more than 600,000 times at a water temperature of 90 degrees. High quality material and finishing tested at a high water pressure of 1.6Mpa.
Created05-22-2010
Modified04-28-2020 8:00:59am
MD5a34e751c96ca2c80e811fc0e76e724d4
SHA25691a8b9aec2e10ba82ce31c6f6907a9a3f875ab7a386fcb16064be2a23fb20a2b
Search Googleby EAN or by Title
Query Time0.0182528

Article of interest

You  may have noticed that we were off line for a while here and there over the past couple days.

We had planned one short outage and posted information about it in advance. But after installing the new RAID system we still had to move all of the data off of the old system over to the new system.

Each time we got data off of one of the hard drives, we had to shut down the system for a short time to physically remove the old drive. We had to do this several times because we had several old drives on the old RAID system and they could only be moved one at a time.

We tried to keep the down time to a minimum but it still took a little longer than expected after the last drive was removed and swapped out. There were a couple unexpted issues relating to that last hard drive.

Fortunately, now with the new RAID in place, we can HOT SWAP drives. This means that when we change out the hard drives we don't have to turn the power off.

We still have a couple internal hard drives that do require a power off if we need to spaw them but it is unlikely we will need to do that unless one dies. The old drives didn't die, we just needed to expand the drive space with larger hard drives so we went to the hot swap system to plan for the future.

Close

Search

Close

Share