Disable All Advertising
EAN-130000000151122   EAN-13 barcode 0000000151122
UPC-A000000151122   UPC-A barcode 000000151122
Product NameFuruno 235DHT-LMSE Bronze Thru-Hull Digital Depth and High-Precision Temp Sensor 7" Stem and High Speed Block (7-Pin)
CategoryElectronics / Photography
Amazon.comA Buy on Amazon ~ B00LEF9M8Q
Weight166.08 ounces    (convert)
FeaturesFuruno 235DHT-LMSE Bronze Thru-Hull, Digital Depth and High-Precision Temp Sensor, 7 in. Stem and High Speed Block (7-Pin)
Long DescriptionBronze Thru-Hull Digital Depth and High-Precision Temp Sensor with 7 Inch Stem and High Speed Fairing Block (7-Pin) 200 Watts 235 kHz Bronze Thru-Hull with 7" Stem Depth and High-Precision Temperature ( + / - .02 degree ) 10-Meter Cable with 7-Pin Connector Fairing Block and Installation Materials Included Product : FURUNO NAVNET 235DHT-LMSE LONG STEM W/ HS FB 235KHZ Manufacturer : FURUNO PARTS Manufacturer Part No : 235DHT-LMSE
Created10-03-2011 12:39:33pm
Modified06-29-2020 4:02:21am
Search Googleby EAN or by Title
Query Time0.0053599

Article of interest

You  may have noticed that we were off line for a while here and there over the past couple days.

We had planned one short outage and posted information about it in advance. But after installing the new RAID system we still had to move all of the data off of the old system over to the new system.

Each time we got data off of one of the hard drives, we had to shut down the system for a short time to physically remove the old drive. We had to do this several times because we had several old drives on the old RAID system and they could only be moved one at a time.

We tried to keep the down time to a minimum but it still took a little longer than expected after the last drive was removed and swapped out. There were a couple unexpted issues relating to that last hard drive.

Fortunately, now with the new RAID in place, we can HOT SWAP drives. This means that when we change out the hard drives we don't have to turn the power off.

We still have a couple internal hard drives that do require a power off if we need to spaw them but it is unlikely we will need to do that unless one dies. The old drives didn't die, we just needed to expand the drive space with larger hard drives so we went to the hot swap system to plan for the future.