EAN-130000000000406   EAN-13 barcode 0000000000406
UPC-A000000000406   UPC-A barcode 000000000406
UPC-E00004006   UPC-E barcode 00004006
Product NameIndoor 4 Vandal Resistant Dome,Ip66
CategoryElectronics / Photography: Computer Hardware
Amazon.comA Buy on Amazon ~ B000MRHIUQ
SKU1164-59750-1
Long DescriptionINDOOR 4 VANDAL RESISTANT DOME,IP66
Created07-16-2013 3:12:09pm
Modified10-25-2014 1:37:01pm
MD55ce9c70f1d95fcdce91d1338ac42701c
SHA256892078e35b01c6fc0addf37f524daaf7b91412967fa5bfc24b209ca767ff9aec
Search Googleby EAN or by Title
Query Time0.0051858

This symbology was developed by the MSI Data Corporation and is based on the Plessey Code symbology. MSI is most often used in warehouses and inventory control.

This is a continuous non-self-checking symbology meaning it has no predetermined length and there is no validation built into the barcode itself. If you want to validate the data stored in the barcode, you would need to use a check digit. Mod 10 is the most common check digit used with MSI but you can also use mod 1010 or mod 1110. It is allowed but generally not a good idea to omit the check digit all together.

There is a start marker which is represented by three binary digits 110 (where 1 is black and 0 is white). There is also a stop marker which is represented by four binary digits 1001. The remaining markers represent the numeric digits 0-9 (no text or special characters) and each digit is represented by twelve binary digits. Below is a table that describes all of the possible markers. The start and stop markers are the main difference between MSI and Plessey. That and the fact that MSI only covers digits 0-9. You can read these stripes as a binary values where 110 is binary 1 and 100 is binary 0. The stop marker simply has an extra bit on the end.

Character Stripe Bits Binary Value
START 110 1
0 100100100100 0000
1 100100100110 0001
2 100100110100 0010
3 100100110110 0011
4 100110100100 0100
5 100110100110 0101
6 100110110100 0110
7 100110110110 0111
8  110100100100 1000
9  110100100110 1001
STOP 1001 0 + extra stripe

 To create a graphical barcode using this process, you can simply string together a series of 1 and 0 graphic images once you have calculated what your barcode should look like using the table shown above. You can view the source code of this page if you want to see how we created the example shown below.

Code [start]375[stop]
Bits: 110 100100110110 100110110110 100110100110 1001
Graphic:

This is just an example of one way to perform the graphic encoding. It is often easier to just draw the lines instead of tacking together individual images. If you would like to create free MSI barcodes, please visit our barcode generator page. You can save the images you make and use them as needed.

Close

Search

Close

Share

Close

Dialog