8. System administration commands (usually only for root)

Enter a Linux command to search for:

METASYS

Section: NUT Manual (8)
Updated: 02/15/2014
Index  |  Return to Main Contents
 

NAME

metasys - Driver for Meta System UPS equipment  

NOTE

This man page only documents the hardware-specific features of the metasys driver. For information about the core driver, see nutupsdrv(8).  

SUPPORTED HARDWARE

The metasys driver was written with the "Meta System UPS Protocol Rev.1.12" kindly supplied from Meta System.

The driver should support all the common features of the ups models:

• HF Line (/2) 1-8 boards

• HF Millennium (810, 820)

• HF TOP Line (910, 920, 930, 940, 950, 970, 980)

• ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000)

• ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI)

• ally HF (800, 1000, 1250, 1600, 2000, 2500)

• Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000)
 

CABLING

The needed cable is a standard pin-to-pin serial cable with at least pins 2, 3, and 5 (on DB9 connector) connected.  

EXTRA ARGUMENTS

This driver supports no extra arguments from ups.conf(5).  

BUGS

This driver has been tested on Meta System HF Millennium 820 and ally HF 1000 only.

Any information about the use of the driver with the other listed UPS are really welcome.  

AUTHOR

Fabio Di Niro <blaxwan@users.sourceforge.net>  

SEE ALSO

 

The core driver:

nutupsdrv(8)  

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/


 

Index

NAME
NOTE
SUPPORTED HARDWARE
CABLING
EXTRA ARGUMENTS
BUGS
AUTHOR
SEE ALSO
The core driver:
Internet resources:

Return to Main Contents

Close

Search

Close

Share

Close

Dialog