Disable All Advertising

5. File formats and conventions eg /etc/passwd

Enter a Linux command to search for:

pulse-cli-syntax

Section: File Formats (5)
Updated: User
Index  |  Return to Main Contents
 

NAME

pulse-cli-syntax - PulseAudio Command Line Interface Syntax  

SYNOPSIS

~/.config/pulse/default.pa

/etc/pulse/default.pa

/etc/pulse/system.pa  

DESCRIPTION

PulseAudio provides a simple command line language used by configuration scripts, the pacmd interactive shell, and the modules module-cli and module-cli-protocol-{unix,tcp}. Empty lines and lines beginning with a hashmark (#) are silently ignored. Several commands are supported.

Note that any boolean arguments can be given positively as '1', 't', 'y', 'true', 'yes' or 'on'. Likewise, negative values can be given as '0', 'f', 'n', 'false', 'no' or 'off'. Case is ignored.  

GENERAL COMMANDS

help
Show a quick help on the commands available.
 

STATUS COMMANDS

list-modules
Show all currently loaded modules with their arguments.
list-cards
Show all currently registered cards
list-sinks or list-sources
Show all currently registered sinks (resp. sources).
list-clients
Show all currently active clients.
list-sink-inputs or list-source-outputs
Show all currently active inputs to sinks a.k.a. playback streams (resp. outputs of sources a.k.a. recording streams).
stat
Show some simple statistics about the allocated memory blocks and the space used by them.
info or ls or list
A combination of all status commands described above (all three commands are synonyms).
 

MODULE MANAGEMENT

load-module name [arguments...]
Load a module specified by its name and arguments. For most modules it is OK to be loaded more than once.
unload-module index|name
Unload a module, specified either by its index in the module list or its name.
describe-module name
Give information about a module specified by its name.
 

VOLUME COMMANDS

set-sink-volume|set-source-volume index|name volume
Set the volume of the specified sink (resp. source). You may specify the sink (resp. source) either by its index in the sink/source list or by its name. The volume should be an integer value greater or equal than 0 (muted). Volume 65536 (0x10000) is 'normal' volume a.k.a. 100%. Values greater than this amplify the audio signal (with clipping).
set-sink-mute|set-source-mute index|name boolean
Mute or unmute the specified sink (resp. source). You may specify the sink (resp. source) either by its index or by its name. The mute value is either 0 (not muted) or 1 (muted).
set-sink-input-volume|set-source-output-volume index volume
Set the volume of a sink input (resp. source output) specified by its index. The same volume rules apply as with set-sink-volume.
set-sink-input-mute|set-source-output-mute index boolean
Mute or unmute a sink input (resp. source output) specified by its index. The same mute rules apply as with set-sink-mute.
 

CONFIGURATION COMMANDS

set-default-sink|set-default-source index|name
Make a sink (resp. source) the default. You may specify the sink (resp. source) by its index in the sink (resp. source) list or by its name.

Note that defaults may be overridden by various policy modules or by specific stream configurations.

set-card-profile index|name profile-name
Change the profile of a card.
set-sink-port|set-source-port index|name port-name
Change the profile of a sink (resp. source).
set-port-latency-offset card-index|card-name port-name offset
Change the latency offset of a port belonging to the specified card
suspend-sink|suspend-source name|index true|false
Suspend or resume the specified sink or source (which may be specified either by its name or index), depending whether true (suspend) or false (resume) is passed as last argument. Suspending a sink will pause all playback and suspending a source will pause all capturing. Depending on the module implementing the sink or source this might have the effect that the underlying device is closed, making it available for other applications to use. The exact behaviour depends on the module.
suspend boolean
Suspend all sinks and sources.
 

MOVING STREAMS

move-sink-input|move-source-output index sink-index|sink-name
Move sink input (resp. source output) to another sink (resp. source).
 

PROPERTY LISTS

update-sink-proplist|update-source-proplist index|name properties
Update the properties of a sink (resp. source) specified by name or index. The property is specified as e.g. device.description="My Preferred Name"
update-sink-input-proplist|update-source-output-proplist index properties
Update the properties of a sink input (resp. source output) specified by index. The properties are specified as above.
 

SAMPLE CACHE

list-samples
Lists the contents of the sample cache.
play-sample name sink-index|sink-name
Play a sample cache entry to a sink.
remove-sample name
Remove an entry from the sample cache.
load-sample name filename
Load an audio file to the sample cache.
load-sample-lazy name filename
Create a new entry in the sample cache, but don't load the sample immediately. The sample is loaded only when it is first used. After a certain idle time it is freed again.
load-sample-dir-lazy path
Load all entries in the specified directory into the sample cache as lazy entries. A shell globbing expression (e.g. *.wav) may be appended to the path of the directory to add.
 

KILLING CLIENTS/STREAMS

kill-client index
Remove a client forcibly from the server. There is no protection against the client reconnecting immediately.
kill-sink-input|kill-source-output index
Remove a sink input (resp. source output) forcibly from the server. This will not remove the owning client or any other streams opened by the same client from the server.
 

LOG COMMANDS

set-log-level numeric-level
Change the log level.
set-log-meta boolean
Show source code location in log messages.
set-log-target target
Change the log target (null, auto, journal, syslog, stderr, file:PATH, newfile:PATH).
set-log-time boolean
Show timestamps in log messages.
set-log-backtrace num-frames
Show backtrace in log messages.
 

MISCELLANEOUS COMMANDS

play-file filename sink-index|sink-name
Play an audio file to a sink.
dump
Dump the daemon's current configuration in CLI commands.
dump-volumes
Debug: Shows the current state of all volumes.
shared
Debug: Show shared properties.
send-message recipient message message_parameters
Send a message to the specified recipient object. If applicable an additional string containing message parameters can be specified. A string is returned as a response to the message. For available messages see https://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/doc/messaging_api.txt.
exit
Terminate the daemon. If you want to terminate a CLI connection ("log out") you might want to use ctrl+d
 

META COMMANDS

In addition to the commands described above there are a few meta directives supported by the command line interpreter.
.include filename|folder
Executes the commands from the specified script file or in all of the *.pa files within the folder.
.fail and .nofail
Enable (resp. disable) that following failing commands will cancel the execution of the current script file. This is ignored when used on the interactive command line.
.ifexists filename
Execute the subsequent block of commands only if the specified file exists. Typically filename indicates a module. Relative paths are resolved using the module directory as the base. By using an absolute path, the existence of other files can be checked as well.
.else and .endif
A block of commands is delimited by an .else or .endif meta command. Nesting conditional commands is not supported.
 

AUTHORS

The PulseAudio Developers <pulseaudio-discuss (at) lists (dot) freedesktop (dot) org>; PulseAudio is available from http://pulseaudio.org/  

SEE ALSO

default.pa(5), pacmd(1), pulseaudio(1)


 

Index

NAME
SYNOPSIS
DESCRIPTION
GENERAL COMMANDS
STATUS COMMANDS
MODULE MANAGEMENT
VOLUME COMMANDS
CONFIGURATION COMMANDS
MOVING STREAMS
PROPERTY LISTS
SAMPLE CACHE
KILLING CLIENTS/STREAMS
LOG COMMANDS
MISCELLANEOUS COMMANDS
META COMMANDS
AUTHORS
SEE ALSO

Return to Main Contents