HEXDUMPSection: User Commands (1)
Index | Return to Main Contents
NAMEhexdump , hd - ASCII, decimal, hexadecimal, octal dump
SYNOPSIS[-bcCdovx ] [-e format_string ] [-f format_file ] [-n length ] -words [-s offset ] file ...
hd [-bcdovx ] [-e format_string ] [-f format_file ] [-n length ] -words [-s offset ] file ...
DESCRIPTIONThe utility is a filter which displays the specified files, or the standard input, if no files are specified, in a user specified format.
The options are as follows:
- One-byte octal display Display the input offset in hexadecimal, followed by sixteen space-separated, three column, zero-filled, bytes of input data, in octal, per line.
- One-byte character display Display the input offset in hexadecimal, followed by sixteen space-separated, three column, space-filled, characters of input data per line.
Canonical hex+ASCII display
Display the input offset in hexadecimal, followed by sixteen
space-separated, two column, hexadecimal bytes, followed by the
same sixteen bytes in %_p format enclosed in ``|'' characters.
Calling the command hd implies this option.
- Two-byte decimal display Display the input offset in hexadecimal, followed by eight space-separated, five column, zero-filled, two-byte units of input data, in unsigned decimal, per line.
- -e format_string
- Specify a format string to be used for displaying data.
- -f format_file
- Specify a file that contains one or more newline separated format strings. Empty lines and lines whose first non-blank character is a hash mark ( # are ignored.
- -n length
- Interpret only length bytes of input.
- Two-byte octal display Display the input offset in hexadecimal, followed by eight space-separated, six column, zero-filled, two byte quantities of input data, in octal, per line.
- -s offset
- Skip offset bytes from the beginning of the input. By default, offset is interpreted as a decimal number. With a leading 0x or 0X offset is interpreted as a hexadecimal number, otherwise, with a leading 0 offset is interpreted as an octal number. Appending the character b k or m to offset causes it to be interpreted as a multiple of 512 1024 or 1048576 respectively.
- Cause to display all input data. Without the -v option, any number of groups of output lines, which would be identical to the immediately preceding group of output lines (except for the input offsets), are replaced with a line comprised of a single asterisk.
- Two-byte hexadecimal display Display the input offset in hexadecimal, followed by eight, space separated, four column, zero-filled, two-byte quantities of input data, in hexadecimal, per line.
FormatsA format string contains any number of format units, separated by whitespace. A format unit contains up to three items: an iteration count, a byte count, and a format.
The iteration count is an optional positive integer, which defaults to one. Each format is applied iteration count times.
The byte count is an optional positive integer. If specified it defines the number of bytes to be interpreted by each iteration of the format.
If an iteration count and/or a byte count is specified, a single slash must be placed after the iteration count and/or before the byte count to disambiguate them. Any whitespace before or after the slash is ignored.
The format is required and must be surrounded by double quote (" ") marks. It is interpreted as a fprintf-style format string (see fprintf(3)), with the following exceptions:
- An asterisk (*) may not be used as a field width or precision.
- A byte count or field precision is required for each ``s'' conversion character (unlike the fprintf(3) default which prints the entire string if the precision is unspecified).
- The conversion characters ``%'', ``h'', ``l'', ``n'', ``p'' and ``q'' are not supported.
The single character escape sequences
described in the C standard are supported:
- "NUL \0"
- "<alert character> \a"
- "<backspace> \b"
- "<form-feed> \f"
- "<newline> \n"
- "<carriage return>\r"
- "<vertical tab>\v"
utility also supports the following additional conversion strings:
- _a [dox ]
- Display the input offset, cumulative across input files, of the next byte to be displayed. The appended characters d o and x specify the display base as decimal, octal or hexadecimal respectively.
- _A [dox ]
- Identical to the _a conversion string except that it is only performed once, when all of the input data has been processed.
- Output characters in the default character set. Nonprinting characters are displayed in three character, zero-padded octal, except for those representable by standard escape notation (see above), which are displayed as two character strings.
- Output characters in the default character set. Nonprinting characters are displayed as a single ``. ''
characters, with the exception that control characters are
displayed using the following, lower-case, names.
Characters greater than 0xff, hexadecimal, are displayed as hexadecimal
- "000 NUL" Ta 001 SOH Ta 002 STX Ta 003 ETX Ta 004 EOT Ta 005 ENQ
- "006 ACK" Ta 007 BEL Ta 008 BS Ta 009 HT Ta 00A LF Ta 00B VT
- "00C FF" Ta 00D CR Ta 00E SO Ta 00F SI Ta 010 DLE Ta 011 DC1
- "012 DC2" Ta 013 DC3 Ta 014 DC4 Ta 015 NAK Ta 016 SYN Ta 017 ETB
- "018 CAN" Ta 019 EM Ta 01A SUB Ta 01B ESC Ta 01C FS Ta 01D GS
- "01E RS" Ta 01F US Ta 07F DEL Ta Ta Ta
The default and supported byte counts for the conversion characters are as follows:
- %_c , %_p , %_u , %c
- One byte counts only.
- %d , %i , %o %u , %X , %x
- Four byte default, one, two and four byte counts supported.
- %E , %e , %f %G , %g
- Eight byte default, four and twelve byte counts supported.
The amount of data interpreted by each format string is the sum of the data required by each format unit, which is the iteration count times the byte count, or the iteration count times the number of bytes required by the format if the byte count is not specified.
The input is manipulated in ``blocks'', where a block is defined as the largest amount of data specified by any format string. Format strings interpreting less than an input block's worth of data, whose last format unit both interprets some number of bytes and does not have a specified iteration count, have the iteration count incremented until the entire input block has been processed or there is not enough data remaining in the block to satisfy the format string.
If, either as a result of user specification or modifying the iteration count as described above, an iteration count is greater than one, no trailing whitespace characters are output during the last iteration.
It is an error to specify a byte count as well as multiple conversion characters or strings unless all but one of the conversion characters or strings is _a or _A
If, as a result of the specification of the -n option or end-of-file being reached, input data only partially satisfies a format string, the input block is zero-padded sufficiently to display all available data (i.e., any format units overlapping the end of data will display some number of the zero bytes).
Further output by such format strings is replaced by an equivalent number of spaces. An equivalent number of spaces is defined as the number of spaces output by an s conversion character with the same field width and precision as the original conversion character or conversion string but with any ``+ '' `` '' ``# '' conversion flag characters removed, and referencing a NULL string.
EXIT STATUSEx -std hexdump hd
EXAMPLESDisplay the input in perusal format:
"%06.6_ao " 12/1 "%3_u " "\t\t" "%_p " "\n"
Implement the -x option:
"%07.7_Ax\n" "%07.7_ax " 8/2 "%04x " "\n"
Some examples for the -e option:
# hex bytes % echo hello | hexdump -v -e '/1 "%02X "' ; echo 68 65 6C 6C 6F 0A # same, with ASCII section % echo hello | hexdump -e '8/1 "%02X ""\t"" "' -e '8/1 "%c""\n"' 68 65 6C 6C 6F 0A hello # hex with preceding 'x' % echo hello | hexdump -v -e '"x" 1/1 "%02X" " "' ; echo x68 x65 x6C x6C x6F x0A # one hex byte per line % echo hello | hexdump -v -e '/1 "%02X\n"' 68 65 6C 6C 6F 0A # a table of byte#, hex, decimal, octal, ASCII % echo hello | hexdump -v -e '/1 "%_ad# "' -e '/1 "%02X hex"' -e '/1 " = %03i dec"' -e '/1 " = %03o oct"' -e '/1 " = _%c\_\n"' 0# 68 hex = 104 dec = 150 oct = _h_ 1# 65 hex = 101 dec = 145 oct = _e_ 2# 6C hex = 108 dec = 154 oct = _l_ 3# 6C hex = 108 dec = 154 oct = _l_ 4# 6F hex = 111 dec = 157 oct = _o_ 5# 0A hex = 010 dec = 012 oct = _ _ # byte# & ASCII with control chars % echo hello | hexdump -v -e '/1 "%_ad# "' -e '/1 " _%_u\_\n"' 0# _h_ 1# _e_ 2# _l_ 3# _l_ 4# _o_ 5# _lf_
SEE ALSOgdb(1), od(1)
Return to Main Contents